TAHP-过氧化氢叔戊基--CAS.3425-61-4

公司: 山东海京新材料有限公司
联系人: 刘总
手机: 13220762561
电话: 0536-8688945
地址: 山东省潍坊市滨海区大家洼街道海化街鸢 都大厦1号楼601
留言咨询 更多信息
分享:
关键词: TAHP-过氧化氢叔戊基--CAS3425-61-4           

产品介绍

商品名称:TAHP

中文名称:过氧化氢叔戊基

化学名称:特戊基过氧化氢

分子式:C5H12O2

分子量:104.1

理论活性氧含量:15.36%

CAS号:3425-61-4

主要分解产物:甲烷,叔戊醇。


指标Safety indicators:

半衰期(纯产品测得):

0.1小时:202℃ 

1小时:183℃   

10时:165℃  

自加速分解温度(SADT):80 ℃

报警温度(Tem):75℃  

控制温度(Tc):--    

贮存温度(Tsmax):--/15 ℃     


技术标准:

纯度:85%±1.0%       

活性氧含量:10.92-11.18%       

其它过氧化物:2% max


用途:

TAHP是一种常用的自由基反应的引发剂,其特点是热稳定性好,易于控制,在50℃以下,其活性在三个月内无明显变化,且无须费用较高的冷冻贮存,可用于乳液聚合、水相聚合、固化及接技聚合等领域,在许多方面的性能优于过二硫酸盐、异丙苯过氧化氢和过氧化苯甲酰。TAHP的分解产物主要为叔丁醇等,无腐蚀性,对设备要求不高。而其它引发剂多数都会形成酸性副产物。


TAHP同时也广泛地应用于苯乙烯和苯乙烯共聚体(如SAN、ABS等),丙烯酸和甲基丙烯酸、氯乙烯的聚合引发剂。

TAHP是一种重要的有机合成中间体。


包装

标准包装是净重25公斤或180公斤的聚乙烯塑料桶,也可用IBC包装,但要特别注意用IBC包装时SADT为50℃,危急温度为55℃。小包装也可按用户的要求的规格包装。


TAHP为E类液体有机过氧化物,货物分类:5.2,联合国编号:3107,二类危险货物包装.

注意事项:

(1) 远离火种、明火和热源。

(2) 避免接触还原剂(如胺类)、酸、碱和重金属化合物(如促进剂、金属皂等)

(3) 请参照本产品的数据表(MSDS)。


贮存条件:

保持包装密闭并处于良好通风状态下,贮存温度≤35℃,避免和还原剂如胺类、酸、碱、重金属化合物(促进剂及金属皂),严禁在库房内分装及取用。


贮存稳定性:

按厂家提示的条件进行保存,产品在六个月内可保证出厂技术标准。


灭火:

小的火灾需用干粉或二氧化碳灭火器灭火,同时用大量水喷洒,防止再燃。大火需在安 全距离之外用大量水喷射。


Product name:TAHP

English name:Tert-amyhyl droperoxide

Chemical name: terpentyl hydrogen peroxide

Molecular formula:C5H12O2

Molecular weight: 104.1

Theoretical active oxygen content: 15.36%

CAS.:3425-61-4

Main decomposition products: methane,  tert amyl alcohol.

Safety indicators:

Half life (measured on pure products):

0.1 hour: 202 ℃

1 hour: 183 ℃

10 hours: 165 ℃

Self accelerating decomposition temperature (SADT): 80 ℃

Alarm temperature (Tem): 75 ℃

Control temperature (Tc):--

Storage temperature (Tsmax): --/15 ℃

Technical standards:

Purity:85%±1.0%        

Active oxygen content:10.92-11.18%       

Other peroxides:2% max


Purpose:

TAHP is a commonly used initiator for free radical reaction. It is characterized by good thermal stability, safe use, and easy control. Its activity does not change significantly within three months at temperatures below 50 ℃, and there is no need for costly frozen storage. It can be used in lotion polymerization, aqueous polymerization, curing, grafting polymerization and other fields. Its performance is superior to that of persulfate, cumene hydroperoxide, and benzoyl peroxide in many aspects. The decomposition products of TAHP are mainly tert butanol , which are non corrosive and do not require high equipment requirements. Most other initiators will form acidic byproducts.


TAHP is also widely used as an initiator for the polymerization of styrene and styrene copolymers (such as SAN, ABS, etc.), acrylic acid, methacrylic acid, and vinyl chloride.

TAHP is a very important intermediate in organic synthesis.


packing:

The standard packaging is a polyethylene plastic bucket with a net weight of 25 kilograms or 180 kilograms, which can also be packaged in IBC. However, it is important to note that when using IBC packaging, the SADT is 50 ℃ and the critical temperature is 55 ℃. Small packaging can also be packaged according to user specifications.


TAHP is a Class E liquid organic peroxide, with a cargo classification of 5.2 and a United Nations number of 3107. It is a packaging for Class II dangerous goods


Safety precautions:

(1) Keep away from sparks, open flames, and heat sources.

(2) Avoid contact with reducing agents (such as amines), acids, bases, and heavy metal compounds (such as accelerators, metal soaps, etc.)(3) Please refer to the Safety Data Sheet (MSDS) of this product.


Storage conditions:

Keep the packaging sealed and in a well ventilated state, with a maximum storage temperature of 35 ℃. Avoid mixing with reducing agents such as amines, acids, alkalis, and heavy metal compounds (accelerators and metal soaps). It is strictly prohibited to pack or use in the warehouse.


Storage stability:

Store according to the manufacturer's instructions, and the product can meet the factory technical standards within six months.


Fire extinguishing:

Small fires need to be extinguished with dry powder or carbon dioxide fire extinguishers, and a large amount of water should be sprayed to prevent reignition. A large fire requires spraying a large amount of water from a safe distance.



山东海京新材料有限公司,专营 过氧化烷类 过氧化酯类 过氧化酰类 过氧化物 等业务,有意向的客户请咨询我们,联系电话:13220762561

CopyRight © 版权所有: 山东海京新材料有限公司 网站地图 XML 备案号:鲁ICP备2023015888号-1

鲁公网安备 37079102000174号


扫一扫访问移动端