TBPA--过氧化乙酸叔丁酯--CAS.107-71-1

公司: 山东海京新材料有限公司
联系人: 刘总
手机: 13220762561
电话: 0536-8688945
地址: 山东省潍坊市滨海区大家洼街道海化街鸢 都大厦1号楼601
留言咨询 更多信息
分享:
关键词: TBPA--过氧化乙酸叔丁酯--CAS107-71-1           

产品介绍

商品名称: TBPA

中文名称: 过氧化乙酸叔丁酯

化学名称:过氧化乙酸叔丁酯 

分子式:C6H12O3

分子量:132.18

理论活性氧量:12.11%

CAS号:107-71-1

UN No.  3103 


性质:

本品为透明液体,用苯、无嗅矿物油、异十二烷等配制稀释。不溶于水,溶于多数有机溶剂,分解温度  159℃,比重(200C)0.923,折光 (200C )0.1035。现提供70%和50%两种规格的产品。

主要分解产物:叔丁醇、乙酸、二叔丁基醚、甲烷、乙烷等。


指标:

半衰期:

0.1小时:139℃  

1小时:119℃ 

10小时:100℃

自加速分解温度(SADT):70℃

危急温度 (Tem):65℃ 

贮存温度(Tsmax):-15/10 ℃ 

活化能 E (KJ/mol):149.36 


技术标准:

外观:透明液体      

含量:75%  min                50%min   

有效氧:8.96%  min              5.93%min  

游离酸:0.5% max                 0.5%max


用途:

1.高压聚乙烯(LDPE)的优良低温引发剂,多用于管式法工艺, 可同引发剂TBPV(过氧化特戊酸叔丁酯),TBPEH(过氧化-2-乙基已酸叔丁酯),引发剂TBPB(过氧化苯甲酸叔丁酯)复合引发剂体系,聚合效果好。

2. 是不饱和聚酯的高温固化剂。

3. 可用于苯乙烯或苯乙烯的共聚物聚合引发剂及甲基丙烯酸酯、醋酸乙烯酯的聚合引发剂。


包装及运输:

标准包装为20公斤的聚乙烯桶包装。也可根据客户的要求的包装尺寸供货,客户可在订货时提出要求。


储存注意事项:

1.储存于阴凉通风的空间内,仓温不超过30℃。

2. 远离火种,热源。应与酸类,还原剂,易燃物,可燃物,还原剂等分开存放。

3. 储存间的照明通风等设施采用防爆型,开关设在户外。

4. 搬运时应小心轻放,防止包装及容器的破损,禁止撞击和振荡,分装和搬运作业要注意个人防护。

5. 请客户在贮运和使用本产品时仔细阅读《技术说明书(MSDS)》。


产品有效期:

在严格按照生产厂家提示的条件贮存、运输。三个月内产品质量可确实保证。


火灾防护:

1.本产品可能因受热而剧烈分解,会猛烈起火,少量产品小火应迅速用泡沫或干粉灭火器进行灭火。

2. 大火应迅速撤达到不危险的距离以外并用水枪朴救,通知消防部门处理。


Product name: TBPA

English name: Tert-butyl peroxyacetate

Chemical name: tert butyl peroxyacetate

Molecular formula:C6H12O3

Molecular weight:132.18

Theoretical active oxygen content:12.11%

CAS.:107-71-1

UN No.  3103 


Property:

This product is a colorless transparent liquid, diluted with benzene, odorless mineral oil, isododecane, etc. Insoluble in water, soluble in most organic solvents, decomposition temperature 159 ℃, specific gravity (200C) 0.923, refractive index (200C) 0.1035. We now offer products in two sizes: 70% and 50%.

Main decomposition products: tert butanol, acetic acid, di tert butyl ether, methane, ethane, etc.


Safety indicators:

Half life:

0.1 hour: 139 ℃

1 hour: 119 ℃

10 hours: 100 ℃

Self accelerating decomposition temperature (SADT): 70 ℃

Emergency temperature (Tem):65℃ 

Storage temperature (Tsmax):-15/10 ℃ 

Activation energy E (KJ/mol):149.36 


Technical standards:

Appearance: Colorless transparent liquid

Content: 75% min            50% min

Effective oxygen: 8.96% min   5.93% min

Free acid: 0.5% max           0.5% max


Purpose:

1. High pressure polyethylene (LDPE) is an excellent low-temperature initiator, commonly used in tubular processes. It can be used in a composite initiator system with initiators TBPV (tert butyl peroxyvalerate), TBPEH (tert butyl peroxy-2-ethylhexoate), and TBPB (tert butyl peroxybenzoate), resulting in better polymerization effects.

2. It is a high-temperature curing agent for unsaturated polyester.

3. It can be used as a copolymer polymerization initiator for styrene or styrene, as well as a polymerization initiator for methacrylate and vinyl acetate.


Packaging and transportation:

The standard packaging is 20 kilograms of polyethylene drum packaging. We can also supply according to the packaging size requested by the customer, and the customer can make requirements when placing an order.


Storage precautions:

1. Store in a cool and ventilated space, with a warehouse temperature not exceeding 30 ℃.

2. Keep away from sparks and heat sources. It should be stored separately from acids, reducing agents, inflammables, combustibles, reducing agents, etc.

3. The lighting and ventilation facilities in the storage room are explosion-proof, with switches located outdoors.

4. When handling, care should be taken to prevent damage to packaging and containers, and impact and oscillation are prohibited. Personal protection should be taken during packaging and handling operations.

5. Please carefully read the Safety Technical Manual (MSDS) when storing, transporting, and using this product.


Product validity period:

Store and transport in strict accordance with the manufacturer's instructions. The product quality can be guaranteed within three months.


Fire protection:

1. This product may decompose violently due to heating, and will ignite violently. A small amount of small fires should be put out quickly with foam or dry powder extinguishers.

2. The fire should be quickly evacuated to a safe distance and rescued with a water gun, and the fire department should be notified for handling.



山东海京新材料有限公司,专营 过氧化烷类 过氧化酯类 过氧化酰类 过氧化物 等业务,有意向的客户请咨询我们,联系电话:13220762561

CopyRight © 版权所有: 山东海京新材料有限公司 网站地图 XML 备案号:鲁ICP备2023015888号-1

鲁公网安备 37079102000174号


扫一扫访问移动端